Epoxy chemistry is certainly not new, and this technology has proven itself across a wide range of industries and applications. Epoxies have demonstrated their value due to desirable characteristics, such as:
There are, however, challenges associated with the use of liquid, two-component epoxies. They can often require expensive and complex application equipment with precise mix ratio control. Liquid epoxies can also require fairly long curing times, making their use in higher volume circumstances less than ideal. Other than that, they can also be just plain messy!
In order to address some of these weaknesses of liquid epoxies, an alternative approach is available in the form of B-stage epoxy films.
B-stage epoxy films are partially cured, film versions of traditional epoxy resins. B-stage films provide the same function as traditional heat-curing epoxies. Films are positioned at the bond interface, and heat is used to complete the polymerization reaction and bond. They are typically supplied in roll form, as a film sheet, or in precut shapes and forms with release liners.
B-stage epoxies offer a number of potential advantages when compared to traditional liquid epoxies.
Opting for film epoxy (over liquid epoxies) has distinct advantages, such as offering near-perfect control over the thickness and reliability of the adhesive. This allows for consistent and high-performing dielectric and thermal properties. Moreover, film epoxies can be provided pre-filled at heavy levels for improved electrical and thermal conductivity. At the same fill levels, liquid epoxies would suffer viscosity and shelf life issues and are therefore unsustainable.
Related Article: Troubleshooting Epoxy Application Errors
B-stage epoxies are typically supplied in roll or die-cut sheet forms, complete with release liner separation. They are available in a range of thicknesses from 25-125µm and with varying thermal and electrical properties as required.
To name a few:
The following are some suggestions for situations where the use of B-stage epoxies might be advantageous. In each case, these are applications where strengths such as speed of curing, higher filler levels, and precision are of value.
As a supplier of electronics protection polymers and coatings, Chase Corporation and Resin Designs division can help you with a comprehensive and unbiased approach to evaluating your application and process. We’ll show you how to maximize efficiency, minimize cost, and improve product reliability. Our outstanding manufacturing and technical support groups can provide your organization with reliable global supply, unmatched quality, and superior technical support.
Please contact us today to discuss your application.