Resin Designs

7 Benefits of Pre-Cured Pads in Thermal Interface Applications

May 15, 2018 / in Thermal Interface Materials, Thermoplastic /

Concerned about the long-term reliability of dispensed, non-curing thermal interface solutions? What about cracking and pump-out that increase thermal resistance after aging and thermal shock? These are just a few of many important reasons to consider using pre-cured pads as a thermal transfer […]

How to Prevent Corrosion on Metal Surfaces due to Moisture and Fluids

March 01, 2018 / in Gel Tek, Resin Designs /

Customers of Resin Designs, a manufacturer of advanced adhesives and sealants, frequently approach the company with the following questions:

  • Do you have a product that blocks water and other fluids from wicking down wires?
  • How about something that’ll stop liquids from getting into solder […]

5 Important Reasons Why You Should be Mindful of Glass Transitions Temperatures When Selecting an Epoxy Adhesive

November 08, 2017 / in Resin Designs, Epoxy Adhesives, Glass Transition /

Unlike thermoplastic alternatives such as hot melt adhesives, cured thermosetting epoxies will not re-flow or melt when heated. Instead, epoxies will undergo a transition from a hard-rigid state to a more pliable, rubbery state. The temperature range during which this transition takes place is […]

How to Select the Right Thermal Interface Material

September 18, 2017 / in Thermal Interface Materials /

A common limiting factor in the advancement of electronics systems is heat. The need to manage heat removal with a cost effective solution is a significant driver in the design of many electronic devices. Thermal interfaces play a huge factor in a device’s operation both in performance and […]

The Various Methods for Curing UV Adhesives

August 31, 2017 / in UV Curable (Type AR/UR), LED technology /

A majority of manufacturers, including Resin Designs, understands that new technology is frequently misunderstood. For example, let’s circle back to 15 years ago when suppliers of LEDs believed that this light source could cure UV adhesives more cost efficiently than mercury bulbs, metal-halide […]

1
Page 1 of 1
Resin Designs Request Technical Literature

Subscribe to Blog via Email

Recent Posts